產品中心

聯系我們

地址:杭州市西湖科技園西園路10號C315室
銷售熱線:400-628-1401 0571-81389091
電話:18758166226 方經理

   13738027672 王經理

E-mail:[email protected]

萬向抽氣罩

萬向抽氣罩

萬向抽氣罩 Universal exhaust hood
PP管徑110MM萬向氣罩
·關節:高密度PP材質,可360旋轉調節方向,易拆卸、重組及清洗。
·關節及密封圈:不易老化之高密度橡膠。
·關節連接桿:304不銹鋼。
·關節松緊旋鈕:高密度PP材質,內嵌不銹鋼軸承,于關節連接桿鎖合。
·氣流調節閥:手動調節外部閥門旋鈕,控制進入之氣流量。
·拱形/杯形集氣罩:高密度PP/PC材質。
·伸縮導管:110mmPVC/PP。
·獨有360O旋轉裝置:以固定架為中心最大活動半徑可達1600mm。
·固定底座:非粘接而成,模具注塑一體成型,牢度強,不脫底。
110mm-diameter PP universal gas hood:
·Joint: made of high-density PP; rotatable for 360°; easy to disassemble, reassemble and clean.
·Joint and sealing ring: non-aging high-density rubber.
·Joint lever: 304 stainless steel.
·Adjustable joint knob: High-density PP with a molded-in stainless steel bearing and locking with joint lever.
·Airflow control valve: manual adjust the external valve knob to control the air inflow.
·Arch/cup-shaped gas-collecting hood: high-density PP/PC.
·Flexible conduit: 110mmPVC/PP
·Unique 360°rotary apparatus: the maximum action radius centered at the holder can reach 1,600mm.
·Fixed base: Instead of adhesive bonding, it is integrated through mould injection molding with strong fastness and good bottom-off resistance.

管徑75MM新型萬向氣罩
    ·關節:高強度不銹鋼絲與進口尼龍制造,可隨意調整角度,易拆卸、清洗。
    ·管體:采用合金材料制造,美觀大方。
    ·調控裝置:采用氣動撐桿控制高度,內外合金管伸縮控制長度。
    ·氣流調節閥:手動調節外部閥門旋鈕,控制進入的空氣流量。
    ·氣流拱形集氣罩:高密度PP/PC材質。
    ·旋轉裝置:安裝了360O旋轉裝置,以固定架為中心,最大活動半徑可達1250mm。
    ·固定底座:模具注塑一體成型,牢度強,不脫底。
New 75mm-diameter universal gas hood:
·Joint: made of high-strength stainless steel wire and imported nylon; random angle adjustment; easy to disassemble and clean.
·Pipe: made of alloy material with elegant appearance.
·Regulation installation: height is controlled by pneumatic stay bar and length is controlled by the flexible internal and external alloy pipe.
·Airflow control valve: manual adjust the external valve knob to control the air inflow.
·Arch gas-collecting hood: high-density PP/PC.
·Rotary apparatus: the 360°rotary installation enables the maximum action radius centered at the holder reach 1,250mm.
·Fixed base: It is integrated through mould injection molding with strong fastness and good bottom-off resistance.

上一頁
我公司主要生產:實驗臺通風柜專用柜防腐通風柜實驗室配件鋼木實驗臺全鋼實驗臺全木實驗臺全鋼通風柜全木通風柜pp通風柜藥品柜等產品
點擊這里給我發消息
點擊這里給我發消息
体彩北京单场官网